CUSTOM RESOLUTION UTILITY NOT WORKING .EXE
CUSTOM RESOLUTION UTILITY NOT WORKING DRIVER

Accell B086B-006B UltraAV DisplayPort 1.2 to HDMI 1.4 Active Adapter.

Accell B086B-008B UltraAV Mini DisplayPort 1.1 to HDMI 1.4 Active Adapter.

Accell B086B-003B UltraAV DisplayPort 1.1 to HDMI 1.4 Active Adapter.

These DisplayPort to HDMI adapters support up to 300 MHz pixel clock without patching the driver:.

CUSTOM RESOLUTION UTILITY NOT WORKING DRIVER

Passive DisplayPort to HDMI adapters are limited to 165 MHz unless the driver is patched.HDMI 2.0 is limited to 600 MHz and requires both an HDMI support data block and an HDMI 2.0 data block in the first extension block.Make sure to override this and set it to 340 MHz. AMD/ATI's driver also listens to the TMDS clock limit in the HDMI support data block.Older GPUs are limited to 165 MHz unless the driver is patched. AMD 7000-series and newer GPUs support up to 297 MHz. HDMI is treated as single-link DVI unless an HDMI support data block is defined in the first extension block.Pay attention to pixel clock limits:Single-link DVI is limited to 165 MHz and dual-link DVI is limited to 330 MHz unless the graphics driver is patched:.'Automatic - Old standard' uses the GTF standard.'Automatic - CRT standard' uses timing parameters compatible with CRT monitors.This may help when trying higher refresh rates. 'Automatic - LCD reduced' adjusts the timing parameters for some resolutions to reduce the pixel clock.'Automatic - LCD native' uses standard timing parameters for the native refresh rate.'Automatic - LCD standard' uses standard timing parameters commonly used with LCD monitors and HDTVs.The dialog will always open in this mode. 'Manual' allows the timing parameters to be set manually.Use the timing options to help fill in the values:.Use a DisplayID extension block to add resolutions with higher limits. EDID detailed resolutions are limited to 4095x4095 and 655.35 MHz pixel clock.The graphics driver will automatically add the refresh rate to lower scaled resolutions. To add other refresh rates, add the refresh rate at the native resolution. Laptop displays usually don't have scalers and can't display non-native resolutions without GPU scaling.Higher resolutions will only work if the monitor can handle them. Lower resolutions will be scaled up if GPU scaling is enabled in the graphics driver's control panel, but higher resolutions won't be scaled down by the GPU. CRU adds monitor resolutions, not scaled resolutions.The graphics driver will automatically add some common lower resolutions as scaled resolutions. All other resolutions can be removed if they are not needed. The first detailed resolution is considered the preferred or native resolution.More detailed resolutions can be added using extension blocks. Detailed resolutions are the preferred way to add custom resolutions.

CUSTOM RESOLUTION UTILITY NOT WORKING .EXE

exe file and choose 'Install EDID' to install the EDID override on all matching displays. If you have an older Intel GPU, use the 'Export.' button and choose 'EXE file' for the file type to export a self-contained EDID override installer. Add custom resolutions, remove unwanted resolutions, edit FreeSync ranges, and more.

Custom resolution utility not working